How would one change some lights on a 2ed gen durango?

So, how can some one change the interior dome lights of a 2006 durango? Like if one wanted to put new colored bulbs in? dome lights such as on the lift gate, the second row seating and the above the dash board. also, how would one change the head lights on a 2006 durango as well?

thanksHow would one change some lights on a 2ed gen durango?For the dome lights, just remove the cover to the light. A small flat blade screw driver works well for this. Just don't break the tabs. Start in the middle of the longest side. This is where the cover is weakest and you can pry it to see the tabs. If it is a clear lens, you should be able to see the tabs through the lens on the edges. They will be small rectangles.



As far as the headlights, this is a bit trickier as some of the bolts are behind the bumper. If you have small hands and quite dexterous you may be able to wrench them out. Or a 1/4 inch ratchet with a shallow 10mm may squeeze between the bumper and headlamp. Then the upper ones and then a lot of prying to get it out. It's a tight fit and a stupid design.

search myspace

database